- Erwin Technical College
- Forklift Certification
-
Forklift Certification
This OSHA 10-Hour Construction Industry Outreach Training Outline is structured to be taught during four separate days. It contains all required OSHA-10 topics with emphasis on Powered Industrial Truck training. The class segments are 60 to 90 minutes long with a 10-minute break between segments. Student registration is completed on the first day of class.
Attendance dates:
Meeting Times Cost
Details
October 9th - October 12th 2023
5pm-9:30pm $138.50
For further information please contact our Evening Counselors Kelly.Rashford@hcps.net or Debra.Mora@hcps.net
Class Objectives
-
Define Powered Industrial Trucks (PIT)
-
Discuss the Benefits of Forklift Training
-
Discuss the Different Types of Forklifts
-
Discuss Forklift Training Requirements
Below are the daily agendas.
DAY ONE
Session I: Total Time 90-Minutes
Allotted Time 30-Minutes Topic: Introduction
-
Welcome & Class Schedule Explanation
-
School Policy and Rules
-
Registration Forms
-
Students Introduce Themselves
Allotted Time 60-Minutes Topic: Introduction to OSHA
-
The Importance of OSHA
-
Your Rights Under OSHA
-
Employer Responsibilities Under OSHA
-
OSHA Standards
Break Time 10-Minutes
Session II: Total Time 90-Minutes
Allotted Time 60-Minutes Topic: Introduction to OSHA (continued)
-
OSHA Inspections, Priorities, and Penalties
-
Obtaining Help from OSHA
-
Summary and Review
-
Quiz
Break Time 10-Minutes
Session III: Total Time 60-Minutes
Allotted Time 30-Minutes Topic: PPE and Lifesaving Equipment{30m}
-
Basic Required PPE (most construction sites)
-
Head Protection
-
Eye and Face Protection
-
Foot Protection
-
Hand Protection
-
Hearing Protection
-
Special Environment (Acid Suits, Boots, etc.)
-
Airborne and Liquid Contaminates
-
Emergency Escape / Respiratory Protection
Allotted Time 30-Minutes Topic: Scaffolds(30m)
-
Types of Scaffolds
-
-
Stationary
-
Suspended
-
Mobile
-
-
Scaffold Components and Proper Construction
-
Inspection by a Competent Person
-
Handrails, Toe Boards, and Other Fall Protection
-
Overhead Power Lines and Electrical Hazards
-
Impact of Weather Conditions
End of OSHA-10 Hour Training Day One
DAY TWO
Session IV: Total Time 90-Minutes
Allotted Time 15-Minutes Topic: OSHA Focus Four Hazards
-
Introduction to Focus Four - All Topics Overview
-
-
Video - Choice or Chance
-
Allotted Time 75-Minutes Topic: OSHA Focus Four Hazards
-
Falls(1-1/2hr)
-
-
Identifying Major Hazards
-
Describe Types of Hazards
-
Protecting Workers From The Hazard
-
Employer Requirements to Protect Workers
-
Break Time 10-Minutes
Session V: Total Time 90-Minutes
Allotted Time 60-Minutes Topic: OSHA Focus Four Hazards
-
Electrocution(1hr)
-
-
Identifying Major Hazards
-
Describe Types of Hazards
-
Protecting Workers From The Hazard
-
Employer Requirements to Protect Workers
-
Allotted Time 30-Minutes Topic: OSHA Focus Four Hazards
-
Struck – By(1hr)
-
-
Identifying Major Hazards
-
Describe Types of Hazards
-
Break Time 10-Minutes
Session VI: Total Time 60-Minutes
Allotted Time 30-Minutes Topic: OSHA Focus Four Hazards
-
Struck – By(Continue)(1hr)
-
-
Protecting Workers From The Hazard
-
Employer Requirements to Protect Workers
-
Allotted Time 30-Minutes Topic: Health Hazards in Construction(30m)
-
Hazard Communication
-
Hazardous Materials
-
Exposure to Hazards - Routes of Entry
-
Noise Hazards and Controls (Admin & Engineering)
-
Heat Related Stress
-
Fiberglass, Asbestos, Silicosis
-
Nuclear (Radiation) Hazards
End of OSHA-10 Hour Training Day Two
DAY THREE
Session VII: Total Time 90-Minutes
Allotted Time 60-Minutes Topic: OSHA Focus Four Hazards
-
Caught - In or Between(1hr)
-
-
Identifying Major Hazards
-
Describe Types of Hazards
-
Protecting Workers From The Hazard
-
-
-
Employer Requirements to Protect Workers
-
Allotted Time 30-Minutes Topic: Hazardous Material & Hazard Communication
-
Applicable Regulations
-
Hazardous Chemicals
-
-
136 Highly Hazardous on OSHA List
-
-
Hazard Communication Programs
-
-
Labeling and Warnings
-
Safety Data Sheets
-
Employee Training
-
-
Labeling Requirements (Original Containers)
-
-
Material Identity
-
Warnings
-
Manufacturer Information
-
-
Safety Data Sheets (Standardized 20-Item Format)
-
-
Manufacturer / Importer Information
-
-
-
Material Identification
-
Physical / Chemical Characteristics
-
Fire and Explosion Hazard Information
-
Reactivity Information
-
Health Hazard Information
-
-
Location of SDS Information
-
-
Employee Awareness and Availability
-
-
Examples of Hazardous Materials
-
-
Ammonia and Chlorine
-
Hydrogen Sulfide
-
-
-
Hydrogen Gas
-
Acids (Sulfuric & Phosphoric)
-
Lead
-
Break Time 10-Minutes
Session VIII: Total Time 90-Minutes
Allotted Time 30-Minutes Topic: Stairways and Ladders(30)
-
Stairway Design and Specifications
-
Stair Rail and Hand Rail Systems
-
Platforms and Landings
-
Types of Ladders
-
Ladder Selection, Placement and Use
-
Load Capacity (Maximum Intended Load)
-
Ladder Safety Rules
Allotted Time 60-Minutes Topic: Materials Handling, Storage, Use, and Disposal(30)
-
Manual Material Handling (Proper Lifting)
-
Machine Material Handling (Forklifts, Crane, etc.)
-
-
Trained and Qualified Operators
-
Pre-Operation Check, Periodic Maintenance
-
Fueling Machines and Equipment
-
-
-
Fire Extinguishers - Types & Application
-
-
Ground Conditions (Firm & Level Surfaces)
-
-
Stability and Roll-Over Protection
-
-
Proper Rigging and Placement of Loads
-
Inspection of Slings, Cables, and Chains for Lifting
-
Storage Area Maintenance (Aisle Ways Open)
-
Fire, Explosion, Incompatible / Interactive Materials
Break Time 10-Minutes
Session IX: Total Time 60-Minutes
Allotted Time 60-Minutes Topic: Tools Safety—Hand and Power Tools
-
Tool Inspections
-
Identifying Tool Hazards
-
Proper Tool Use (Right Tool for the Right Job)
-
Proper Tool Maintenance Electrical Repairs (Qualified Person)
-
Safe Practices
-
-
Grinder
-
Nail Gun
-
Drill Motor / Screw Gun
-
Powder Actuated
-
Specialty Tools
-
End of OSHA-10 Hour Training Day Three
Conclusion of OSHA-10 Hour Construction Industry Safety Training Class
DAY FOUR
Session X: Total Time 90-Minutes
Allotted Time 30-Minutes Topic: Introduction to Powered Industrial Truck (PIT)
-
Overview
-
Examples of Misuse and Abuse (Video)
-
Basic Parts Identification and Inspect Vehicle
-
Definition and Description of PIT
-
-
Common Names
-
-
-
Use and Function
-
Internal Combustion Engine
-
Electric Motor
-
-
Exclusions (Vehicles Not Included in This Group)
-
-
Earth Moving (Payloader, Grader, Pan Scraper)
-
-
-
Over the Road Hauling
-
-
Reasons for Operator Training
-
Annual Fatal Accidents (Before Training was Req’d)
-
-
By Year; By Age Group; By Craft
-
-
Accidents and Injuries (Since Training Requirement)
-
Age, Training, Operator Requirements per OSHA
-
Responsibility for Operator Training
-
Training Must Include
-
-
Formal Instruction (Lecture, Discussion, Written)
-
Practical (Demonstration and Exercises)
-
-
-
Evaluation of Operator Performance
-
Allotted Time 30-Minutes Topic: Classifications of Powered Industrial Truck
-
1 - Electric Motor Rider Trucks
-
-
Characteristics and Features
-
Capacity and Limitations
-
-
-
Areas of General Use / Applications
-
-
2 - Electric Motor Narrow Aisle Trucks
-
-
Characteristics and Features
-
Capacity and Limitations
-
Areas of General Use / Applications
-
-
3 - Electric Motor Hand Trucks (hand/rider)
-
-
Characteristics and Features
-
Capacity and Limitations
-
Areas of General Use / Applications
-
-
4 - Internal Combustion Engine (solid tires)
-
-
Characteristics and Features
-
Capacity and Limitations
-
Areas of General Use / Applications
-
-
5 - Internal Combustion Engine (pneumatic tires)
-
-
Characteristics and Features
-
-
-
Capacity and Limitations
-
Areas of General Use / Applications
-
-
6 - Electric and Internal Combustion Tractors
-
-
Characteristics and Features
-
Capacity and Limitations
-
-
-
Areas of General Use / Applications
-
-
7 - Internal Combustion Engine (solid tires)
-
-
Characteristics and Features
-
Capacity and Limitations
-
Areas of General Use / Applications
-
Allotted Time 30-Minutes Topic: PIT Maintenance and Parts Identification
-
Maintenance Items
-
-
Battery
-
-
-
Engine Coolant
-
Fan Belt(s)
-
Radiator Hoses
-
Engine Air Filter
-
Engine Oil
-
-
Parts Identification
-
-
Falling Object Protection System
-
Headlights, Tail Lights, & Warning Light
-
Steering, Brakes, Accelerator
-
Transmission - Forward & Reverse
-
-
-
Counterweight
-
Hubs, Lugs & Tires
-
Gauges
-
Hydraulic Controls
-
Mast, Carriage, Backrest, & Forks
-
Break Time 10-Minutes
Session XI: Total Time 90-Minutes
Allotted Time 30-Minutes Topic: PIT Maintenance and Parts Identification (cont.)
-
Identification Plate
-
-
Model Number & Serial Number
-
Vehicle Weight
-
Fuel Type
-
-
-
Tires - Size & Type, Tread Width
-
Load (Lifting) Capacity
-
Back Tilt – Degrees
-
Attachments & Features
-
Allotted Time 30-Minutes Topic: Basic Operation and Hydraulic Controls
-
Accelerator & Braking
-
Forward & Reverse
-
Hydraulic Controls Operation
-
-
Lift - Raising and Lowering
-
Tilt - Forward & Backward
-
-
-
Shift - Left and Right
-
Break Time 10-Minutes
Session XII: Total Time 60-Minutes
Allotted Time 60-Minutes Topic: Practicing Fundamentals of Operation
-
Accelerator & Braking
-
Forward & Reverse
-
Hydraulic Controls Operation
-
-
Lift - Raising and Lowering
-
Tilt - Forward & Backward
-
Shift - Left and Right
-
-
Steering and Control of Vehicle
-
Forward & Reverse
-
Hydraulic Controls Operation
-
-
Lift - Raising and Lowering
-
Tilt - Forward & Backward
-
-
-
Shift - Left and Right
-
Conclusion of OSHA-10 Hour Construction Industry Safety Training Class
-